ProductsMRH-R Series Methanol-to-Hydrogen System
The MRH-R Series Methanol-to-hydrogen system produces 65~75% hydrogen purity, with hydrogen output of 30–1000 Nm³/h.
The MRH-R series methanol–water reforming hydrogen-rich system uses methanol and demineralized water as feedstock. Based on methanol steam reforming, conversion is completed in a catalytic reactor to produce hydrogen-rich combustion gas, which can be supplied directly to combustion systems without deep PSA purification. A single unit covers 30-1,000 Nm³/h of product gas and is mainly used for hydrogen blending or partial substitution of natural gas and LPG in industrial boilers and various industrial furnaces. Hydrogen-rich blending improves combustion completeness, suppresses NOx formation, and supports project carbon reduction.
Product Features
Methanol–water steam reforming process; hydrogen-rich combustion gas can be used for blending without deep purification
01
Multiple heat-supply modes to match plant conditions; recovering industrial waste heat further reduces system energy use
02
Can blend with or partially replace natural gas/LPG, cutting carbon emissions and overall fuel cost; suitable for industrial low-carbon retrofits
03
Skid-mounted explosion-proof integrated design with a small footprint; ready for use after on-site tie-in
04
Product gas coverage of 30–1,000 Nm³/h, with a full range of sizes for furnaces and boilers of different scales
05
Dedicated reforming catalyst with high conversion efficiency, long service life, stable operation, and low O&M cost
06
Wide-range load following to match dynamic gas demand of the combustion system under fluctuating production
07
Hydrogen-rich blending improves flame quality, achieves more complete combustion, reduces NOx, and raises furnace thermal efficiency
08
Intelligent explosion-proof control with multiple safety interlocks for over-temperature, over-pressure, and abnormal level; automatic, unattended operation
09
General Technical specifications
| Parameter | Specification |
|---|---|
Hydrogen Purity | 65-75% |
Hydrogen pressure | ＜0.4MPaG |
Dew point | ≥-10℃ |
Gas temperature | ≤40℃ |
| Equipment service life | 15 years |
| Flow turndown range | 30~110% |
| Weight | 15kg |
| Purification mode | No purification |
Model specifications
| Model | Methanol | Operating power | Installed power | Dimensions |
|---|---|---|---|---|
| Nm³/h | kg/h | kW | kW | L×W×H mm |
| 30 | 15 | 18 | 27 | 3100×2149×2820 |
| 70 | 35 | 42 | 60 | 3100×2149×2820 |
| 100 | 50 | 48 | 80 | 3100×2149×2820 |
| 150 | 75 | 90 | 135 | 3100×2149×3020 |
| 200 | 100 | 120 | 180 | 3100×2149×3020 |
| 300 | 150 | 135 | 180 | 8800×2200×3200 |
| 500 | 250 | 225 | 300 | 10500×2300×3200 |
| 800 | 400 | 360 | 480 | 11500×24600×3870 |
| 1000 | 500 | 450 | 600 | 13570×2460×3950 |
| Notes: 1. Dimensions are for skid-mounted explosion-proof hydrogen production equipment, including the hydrogen production, explosion-proof control, cooling-water, and heating systems (actual dimensions may vary slightly with production and shall be based on the delivered product). 2. Operating power is for reference only; final values shall follow actual operating conditions. | ||||
ProductsMRH-M Series Methanol-to-Hydrogen System
The MRH-M Series Methanol-to-hydrogen system produces 70% purity or combustible gas at 95% purity, with hydrogen output of 1–5 Nm³/h（adjustable）.
The MRH-M methanol-to-hydrogen series is a compact methanol hydrogen production system independently developed and manufactured by SENOHERS. It is compact, mobile, and easy to integrate. Using aqueous methanol as feedstock, reforming produces hydrogen at about 70% purity or combustible gas at 95% purity, with hydrogen output of 1–5 Nm³/h (adjustable).
Product Features
Hydrogen output 1–5 Nm³/h, adjustable and stackable in modules
01
Compact size, easy to integrate into end-use equipment
02
Mobile, simple to operate, one-button start/stop
03
Cost reduction and efficiency gain of 30%+, with CO2 emissions reduced by 50%
04
Model specifications
| Parameter | Specification |
|---|---|
Hydrogen output | 1~5Nm³/h |
Hydrogen Purity | 67-73% |
Hydrogen pressure | ＜100kPa |
Hydrogen temperature | 120~200℃ |
Methanol feedstock | 60% methanol + 40% deionized water (by volume) |
| Methanol consumption | 0.7 kg/Nm³-H2 (pure methanol) |
| Dimensions | 640×353×195 mm (L×W×H) |
| Weight | 15kg |
| Input voltage | 220V |
| Power (startup) | 100W |
| Power (operation) | 60W |
ProductsNRH-P Series Natural Gas-to-Hydrogen System
The NRH-P Series natural gas-to-hydrogen system produces 99.999% hydrogen at 100–500 Nm³/h for high-demand industrial sites.
The NRH-P series natural gas hydrogen production system generates 99.999% high-purity hydrogen through steam reforming of natural gas at 700–900°C and a pressure of 8 kgf/cm² (approx. 0.8 MPa). It is designed for applications with relatively large hydrogen demand, with hydrogen output of 100–500 Nm³/h..
Product Features
Highly integrated design with low heat loss and pressure drop
01
Hydrogen purity up to 99.999%
02
Natural gas specific consumption in the range of 0.4–0.5 Nm³-NG/Nm³-H2
03
High degree of automation with one-button start/stop
04
Automatic load adjustment, with hot-standby available at any time
05
From hot standby, hydrogen can be produced in 30 minutes
06
Model specifications
| Model | 100 | 200 | 300 | 500 |
|---|---|---|---|---|
Hydrogen output | Max.100 Nm³/h | Max.200 Nm³/h | Max.300 Nm³/h | Max.500 Nm³/h |
Purity | 99.999% | 99.999% | 99.999% | 99.999% |
Oxygen | ≤1 ppm | ≤1 ppm | ≤1 ppm | ≤1 ppm |
Dew point | ≤-65℃ | ≤-65℃ | ≤-65℃ | ≤-65℃ |
Hydrogen pressure | 2.0~7.0 bar(g) | 2.0~7.0 bar(g) | 2.0~7.0 bar(g) | 2.0~7.0 bar(g) |
Natural gas | Max. 50 Nm³/h | Max. 100 Nm³/h | Max. 146 Nm³/h | Max. 240 Nm³/h |
Power consumption | ~15 kW | ~22 kW | ~30 kW | ~50 kW |
| Water | ~110 L | ~220 L | ~320 L | ~650 L |
| Instrument air | ~15 Nm³/h | ~20 Nm³/h | ~30 Nm³/h | ~40 Nm³/h |
| Dimensions | 10000×2800×3500 mm | 11000×3200×3500 mm | 12000×3500×3500 mm | 14000×3500×5000 mm |
| Hot start time | Max. 1 h | Max. 1 h | Max. 1.5 h | Max. 2 h |
| Cold start time | Max. 5 h | Max. 6 h | Max. 8 h | Max. 12 h |
ProductsMRH-P Series Methanol-to-Hydrogen System
The MRH-P methanol-reforming hydrogen system produces 99.999% hydrogen at 200–500 Nm³/h for high-demand industrial sites.
The MRH-P methanol-reforming hydrogen system produces 99.999% hydrogen at 200–500 Nm³/h for high-demand industrial sites. The plant makes hydrogen on site and replaces tube-trailer supply, removing long-distance storage and transport and lowering the all-in cost of hydrogen. The complete machine is an explosion-proof skid that integrates methanol reforming, PSA purification, explosion-proof controls, circulating chilled water, and fuel blending. Installation is short and operation is stable.
Product Features
Hydrogen purity up to 99.999%
01
Explosion-proof skid package
02
PSA purification with strong disturbance rejection and continuous
03
Design life of 15 years
04
General specifications
| Item | Specification |
|---|---|
Hydrogen purity | ≥99.999%（vol） |
Outlet pressure | ≤1.3MPaG |
Chiller | 20HP |
Hydrogen temperature | ≤40℃ |
Equipment life | 15 years |
Flow adjustment range | 30-110% |
Purification | Single-stage PSA |
Model specifications
| Mode | MeOH | Water | Run | Installed | CW | IA | Dimensions |
|---|---|---|---|---|---|---|---|
| Nm3/h | kg/h | L/h | kW | kW | t/h | Nm3/h | mm |
200 | 87 | 96 | 18 | 38.5 | 10 | 10 | H2： 10200*3150*3430 Heat：7300*2400*2725 |
250 | 140 | 150 | 30 | 38.5 | 15 | 10 | H2： 12000*3350*3430 Heat：7300*2400*2725 |
350 | 196 | 210 | 36.75 | 60 | 15 | 15 | H2： 12450*3540*3770 Heat：7800*2400*2725 |
400 | 224 | 240 | 42 | 65 | 20 | 15 | H2： 12450*3540*3970 Heat：7800*2400*2725 |
500 | 280 | 300 | 50 | 65 | 20 | 15 | H2： 13650*3540*3970 Heat：7800*2400*2725 |
Note: EPC scope includes the hydrogen unit, PSA, explosion-proof controls, chilled-water, blending, demineralized-water, and heat-supply systems — engineering, supply, site installation, technical service, and training. Dimensions are indicative; the as-built unit prevails. | |||||||