ProductsMRH-R Series Methanol-to-Hydrogen System
The MRH-R Series Methanol-to-hydrogen system produces 65~75% hydrogen purity, with hydrogen output of 30–1000 Nm³/h.
The MRH-R series methanol–water reforming hydrogen-rich system uses methanol and demineralized water as feedstock. Based on methanol steam reforming, conversion is completed in a catalytic reactor to produce hydrogen-rich combustion gas, which can be supplied directly to combustion systems without deep PSA purification. A single unit covers 30-1,000 Nm³/h of product gas and is mainly used for hydrogen blending or partial substitution of natural gas and LPG in industrial boilers and various industrial furnaces. Hydrogen-rich blending improves combustion completeness, suppresses NOx formation, and supports project carbon reduction.
Product Features
Methanol–water steam reforming process; hydrogen-rich combustion gas can be used for blending without deep purification
01
Multiple heat-supply modes to match plant conditions; recovering industrial waste heat further reduces system energy use
02
Can blend with or partially replace natural gas/LPG, cutting carbon emissions and overall fuel cost; suitable for industrial low-carbon retrofits
03
Skid-mounted explosion-proof integrated design with a small footprint; ready for use after on-site tie-in
04
Product gas coverage of 30–1,000 Nm³/h, with a full range of sizes for furnaces and boilers of different scales
05
Dedicated reforming catalyst with high conversion efficiency, long service life, stable operation, and low O&M cost
06
Wide-range load following to match dynamic gas demand of the combustion system under fluctuating production
07
Hydrogen-rich blending improves flame quality, achieves more complete combustion, reduces NOx, and raises furnace thermal efficiency
08
Intelligent explosion-proof control with multiple safety interlocks for over-temperature, over-pressure, and abnormal level; automatic, unattended operation
09
General Technical specifications
| Parameter | Specification |
|---|---|
Hydrogen Purity | 65-75% |
Hydrogen pressure | ＜0.4MPaG |
Dew point | ≥-10℃ |
Gas temperature | ≤40℃ |
| Equipment service life | 15 years |
| Flow turndown range | 30~110% |
| Weight | 15kg |
| Purification mode | No purification |
Model specifications
| Model | Methanol | Operating power | Installed power | Dimensions |
|---|---|---|---|---|
| Nm³/h | kg/h | kW | kW | L×W×H mm |
| 30 | 15 | 18 | 27 | 3100×2149×2820 |
| 70 | 35 | 42 | 60 | 3100×2149×2820 |
| 100 | 50 | 48 | 80 | 3100×2149×2820 |
| 150 | 75 | 90 | 135 | 3100×2149×3020 |
| 200 | 100 | 120 | 180 | 3100×2149×3020 |
| 300 | 150 | 135 | 180 | 8800×2200×3200 |
| 500 | 250 | 225 | 300 | 10500×2300×3200 |
| 800 | 400 | 360 | 480 | 11500×24600×3870 |
| 1000 | 500 | 450 | 600 | 13570×2460×3950 |
| Notes: 1. Dimensions are for skid-mounted explosion-proof hydrogen production equipment, including the hydrogen production, explosion-proof control, cooling-water, and heating systems (actual dimensions may vary slightly with production and shall be based on the delivered product). 2. Operating power is for reference only; final values shall follow actual operating conditions. | ||||